Balchan Caliper Enamel Paint 300g – Red – High-Heat Brake Caliper

What it is
High-heat brake caliper enamel designed to refresh and protect visible caliper parts. The ceramic-reinforced formula lays down a smooth, durable film that resists chipping and fading.

Why you’ll like it

• Withstands high temperatures generated under braking (up to 600 °C)

• Strong adhesion and chip resistance for a long-lasting, factory-style look

• Rich colour options to match or customise your build

• Aerosol convenience—easy DIY results with even coverage

Where to use
Brake calipers, brackets and visible hardware made of clean, bare metal.
(Not for pads, rotors/discs, rubber hoses or tyres.)

How to use

1. Clean thoroughly: remove dust, grease and loose rust; mask surrounding areas.

2. Shake well for 1–2 minutes.

3. Spray light, even coats with flash time between coats; avoid heavy wet passes.

4. Allow full cure per label before driving and exposing to heat.

Good to know

• Work in a ventilated area and wear PPE.

• Do not apply on friction surfaces or rubber parts.

• Always test on a small inconspicuous area first.

What’s in the can
1 × Balchan Caliper Enamel Paint 300g